GSM/GPRS Communicator. The BGSM-G gives total confidence in all security and surveillance applications and is the ideal way of completing whatever system . (see instructions), and then close the B-GSM. + Screw the 3[G]. In the event of GSM network signal fail- ure a signal as per figure 3b will be present on terminal . The BGSM-G-EU is Bentel’s all new universal global system mobile (GSM) alarm communicator is a versatile device that accommodates end-users that are not.
|Published (Last):||18 October 2004|
|PDF File Size:||10.15 Mb|
|ePub File Size:||6.94 Mb|
|Price:||Free* [*Free Regsitration Required]|
Using the cabinet, mark the 4 screw locations then drill the anchor screw holes. The content of this article Description This Device manages SMS and Central Station transmissions and can simulate the land line in the event of trouble land line down or even substitute bgsm- land line completely in areas where the GSM service is provided and where the land line is not available.
Before inserting or removing the SIM card, please ensure the unit is powered down. This Device must be installed indoors in a non-hazardous location. Route wires as indicated in Figure 1.
It has home remote automation capabilities and a full event report program. The communicator is protected against tampering and provides tamper signals on two terminals, while the device can also be programmed and controlled via a PC software application which is available as an accessory.
There is also an account supervision feature that sends out information via IP in the event of a communication failure.
Remove the screw and the front cover . If both are ON, it indicates perfect coverage. The performance of this Device depends greatly on GSM Network coverage, therefore, it should not be mounted without first performing placement tests to determine the best location for reception minimun one green LED is ON.
Check for cable conduits and water pipes before drilling.
More information about Elvey Security Nanual. It can effectively monitor optical lengths of up to km per controller for buried, and 80 km for fence installations.
BGSM-G Universal Alarm
The communicator connects the alarm bhsm-g panel to the GSM network manuall report alarm signals directly to the monitoring station receiver, and is compatible with any control panel that communicates using the Contact ID format.
Reattach the front cover  securely to the cabinet. Complete the connections on the terminal board . Lay the cables, then pull them through the cable entry .
Your name Your email address Their name Their email address Your message The details submitted in this form will not be shared with any third parties.
The details submitted in this form will not be shared with any third parties. This Device should be located in a safe dry place away from radio transmitters and similar devices.
Enhancing home automation with IoT OctoberElvey Security TechnologiesProducts, Integrated Solutions By automating elements which are electronically driven, homeowners are given the power to improve their quality of life by implementing these enabling technologies and controlling them via a smart device. The SMS dialler function manages telephone numbers and bgsm-gg trouble alert, periodic transmissions and pay-as-you-go balance messages.
Bentel Security | Products > Security Products > Universal Wireless Communicator – BGSM-G
This Device has 4 Outputs which can be set up from remote locations or used for status signalling. Fit the antenna  ensure that the bolt  is fastened tightly. Using anchor screws not includedmount the cabinet to the wall. Using the connector , connect the GSM Module .
This Week’s Editor’s Pick.